Small Jewelry Laser Welding Machine With High Laser Energy And HD Camera 60W/100W

Small jewelry laser welding machine with high laser energy and HD camera

How the machines works?

The laser welding process utilizes an amplified beam of a specific wavelength to create a strong and nearly seamless weld in seconds. It sounds like a complicated process, but it's actually quite simple.

The beam from a laser welding machine is focused, adjusted and controlled by the operator, just as the flame of a welding torch is adjusted by a jeweler. However, compared to welding, laser welding is faster, cleaner and more cost-effective for many manufacturing and repair applications.

Machine dimension of 60w

What material the small jewelry laser welding machine works?

This welding application is great for precious metals, which is why most jewelers in Australia use jewelry laser welding machines.

All traditional jewelry metals can be laser welded:

all base metals
Krakin
Sterling silver
titanium
palladium
platinum
Platinum is one of the most difficult metals in history to machine and repair, and one of the easiest to laser weld. It is also possible to weld dissimilar metals together, such as gold to platinum and sterling silver to gold.

Operating system supported languages: Chinese, Turkish, Arabic, English, Korean

1. Observation system: The observation system of this jewelry spot welding machine consists of a microscope and a built-in high-definition CCD camera. Users can choose one or both of them as the observation method according to their needs. Both can clearly observe the welding position of the workpiece, which is convenient for welding.

2. Adjustment of the CCD cross cursor: If the light spot is not in the center of the cross cursor in a very clear position of the CCD camera system, you can change the position of the cross cursor by clicking the middle position of the four cross cursors.​​​ the sides of the screen so that the solder joint is in the center of the cursor

3. For welding operations, first ensure that the machine has been turned on normally, put the workpiece into the sight of the observation system, and then slowly move to the clearest position of the observation system.
Point the cursor to the desired welding position, gently step on the foot switch, the machine has laser output for welding.

4. Parameter adjustment, focusing, after the first welding, the welding effect of the solder joint does not meet the requirements, and the parameters need to be adjusted again. Focusing (-3.0-+3.0) makes the welding effect meet the requirements, and will not repeat the welding in the future. Needs to be readjusted.

Specification

Welding Samples

Video

40J Laser Jewellery Welding Machine

Jewelry Laser Welder Water cooling

Small Jewelry Laser Welding Machine With High Laser Energy And HD Camera 60W/100W Images